Difference between revisions of "Chroot"

Revision as of 12:39, 3 November 2014

A chroot on Linux operating systems is an operation that changes the apparent root directory for the current running process and its children. The modified environment is called a "chroot jail".

Copy files while in Rescue Mode

Note: The following section shows how to copy files from a Category:Rackspace Cloud Server while in Rescue Mode.

• Find out which is your "real" root device (i.e., the one that is not the Rescue Mode's root device / the one already mounted):

$ fdisk -l

• Mount "real" root device and required filesystem dirs:

$ mount /dev/xvdb1 /mnt
$ mount -o bind /dev /mnt/dev
$ mount -o bind /sys /mnt/sys
$ mount -o bind /dev/shm /mnt/dev/shm
$ mount -o bind /proc /mnt/proc
$ #***** OR *****:
$ mount /dev/xvdb1 /mnt
$ mount -t proc none /mnt/proc
$ mount --rbind /sys /mnt/sys
$ mount --rbind /dev /mnt/dev

• Set up networking for your chrooted jail:

$ ln -s /etc/resolv.conf /mnt/etc/resolv.conf

• Chroot into your jail:

$ chroot /mnt /bin/bash

• Copy the files to a remote/destination server:

$ rsync -avr /path/to/data/dir user@x.x.x.x:/path/to/dest/data/dir

• Exit the chrooted jail

$ sync
$ exit
$ umount -lf /mnt/{dev,sys,proc}
$ umount /mnt

Finally, exit "Rescue Mode" and you are done.

Converting a root filesystem to ext4

Note: The following section shows how to convert the root filesystem from ext3 to ext4 on a Category:Rackspace Cloud Server while in Rescue Mode.

• Assuming your root device is /dev/xvda1, before you enter Rescue Mode, change your /etc/fstab entry for root from:

/dev/xvda1  /  ext3  errors=remount-ro,noatime,barrier=0 0 1

to:

/dev/xvda1  /  ext4  errors=remount-ro,noatime,barrier=0 0 1

then enter Rescue Mode (do not reboot your server before entering Rescue Mode).

• While in Rescue Mode, find out which device is your "real" root device (i.e., not the Rescue Mode's root device):

$ fdisk -l

• Then run a filesystem check on the "real" root filesystem:

$ fsck.ext3 -pf /dev/xvdb1

• Enable all the ext4 features on the root filesystem:

$ tune2fs -O extents,uninit_bg,dir_index /dev/xvdb1

• Run another filesystem check on the root filesystem (it will most likely find and fix errors. This is completely normal):

$ fsck.ext4 -yfD /dev/xvdb1

You should now be able to exit Rescue Mode and your root filesystem will be using ext4.