GnuPlot

From Christoph's Personal Wiki
Revision as of 07:16, 20 April 2012 by Christoph (Talk | contribs) (→‎Tutorials)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

GnuPlot is a versatile command line programme that can generate two- and three-dimensional plots of functions and data. The programme runs on all major computers and operating systems. GnuPlot is a program with a fairly long history, dating back to 1986.

GnuPlot can produce output directly on screen, or in many formats of graphics files, among which PNG, EPS, SVG, JPEG and many others. The programme can be used both interactively and in batch mode using scripts. The programme is well supported and documented. Extensive help can also be found on the Internet.

GnuPlot is used as the plotting engine of GNU Octave.

gnuplot_i ("gnuplot_pipes")

gnuplot_i is an interface that allows a running program in Fortran or C to pass data to GnuPlot for plotting. gnuplot_i can be downloaded here: http://ndevilla.free.fr/gnuplot/

Examples

Note: Most of the following examples were taken directly from Patrick Hartigan's site. They have been modified.

Running from a file of commands

Probably the easiest way to work; edit the command file in one shell and have a second shell running GnuPlot where I simply keep loading in the new command file and it makes a new eps file each time I load, and then a third shell running ghostview to view the eps file. To load a command file: 

load 'junk.gnu'

Limits

# the noautoscale, xrange, yrange change the x- and y-limits
  set noautoscale
  set xrange [0.5:10]
  set yrange [300:480]
# or plot ranges directly
  plot 'junk.dat' [0.5:10][300:480]
# or choose autoscale for one axis only
  set autoscale x

Style of plot

# choice of points, lines, linespoints, steps, boxes, errorbars, impulses, etc. 
# for errorbar options type 'help plot errorbars'
  set data style linespoints

Point size and type

# pointsize is to expand points
  set pointsize 2.5
# type 'test' to see the colours and point types available
# lt is for colour of the points:
#     -1=black 1=red 2=grn 3=blue 4=purple
#      5=aqua 6=brn 7=orange 8=light-brn
# pt gives a particular point type:
#      1=diamond 2=+ 3=square 4=X 5=triangle 6=*
# postscipt:
#      1=+, 2=X, 3=*, 4=square, 5=filled square, 6=circle,
#      7=filled circle, 8=triangle, 9=filled triangle, etc.

Line colours / styles

# type 'test' to see the colours and point types available.
# Differs from x11 to postscript
# lt chooses a particular line type:
#     -1=black 1=red 2=grn 3=blue 4=purple
#      5=aqua 6=brn 7=orange 8=light-brn
# lt must be specified before pt for coloured points
# for PostScript:
#     -1=normal, 1=grey, 2=dashed, 3=hashed, 4=dot, 5=dot-dash
# lw chooses a line width 1=normal, can use 0.8, 0.3, 1.5, 3, etc.
# ls chooses a line style
  plot sin(x)k with linespoints lt 2 pt 4

Draw a line of arrow between two points

# use the arrow command with nohead to draw just a line:
  set arrow from 1,2 to 4,8.4 nohead lt -1 lw 1.2

Storing and using a line type and point type

The linestyle command is a shortcut to changing the points and line types each time. 

# to store the current setup
  set linestyle
# to view the stored linestyles
  show linestyle
# to use it
  plot sin(x) ls 1
# to erase the styles
  set nolinestyle

Vectors / plotting data from a file / plotting single points

Instead of loading variables into a vector and multiplying vectors together, I usually just make a table where the values of each vector are represented by a column. Then follow the description below to do arithmetic on the columns with awk or the 'plot using' command. 

# To make a table that has column1 = 0.05, 0.1, ... 1.0; column2 = 2*column1+14
  yes | head -20 | awk '{print NR/20., NR/10.+14}' >! table.dat

# If you are using Solaris, you may not have 'yes', so code it (fortran) via
        open(unit=0,file="/dev/null")
 10     write(6,'("y")')
        goto 10
        end

# The 1:2 means plot x from column 1, y from column 2
  plot 'table.dat' using 1:2 

# Note, to do SM-like arithmetic on columns,
# where $n means column n
  plot 'table.dat' using ($3/$1):($2*134.44)

# to plot lines 4-20 from a file with filled square points and double-weight solid lines
# 'w lp lt 1 lw 2 pt 5' means 'with linespoints linetype 1 lineweight 2 pointtype 5'
  plot "< awk 'NR>3 && NR<20 {print $1,$2}' axis.dat" w lp lt 1 lw 2 pt 5 

# to place a single 'X' point at x=4, y=5 (useful for keys)
  plot "< echo 4 5" w p pt 2

Comments in a file begin with '#' and are ignored. For multiple graphs, a blank line in a file is interpreted as 'lift the pen'. Two blank lines indicate a new 'index'. To plot only the data from indices 4 through 6 in a file, where index 0 is the first index: 

 plot 'file' index 4:6

Plotting a function

# first define the function, then plot
  plot f(x) = sin(x*a), a=0.2, f(x) with points
# Make 2 plots, first with points and second with a line, note abbreviations w, l, p
  plot f(x) = sin(x*a), a=0.2, f(x) w p, a=0.4, f(x) w l

Making a square output graph

set size square

Multiple graphs and lines

  set multiplot # Do at beginning, after 'set term' and 'set output' commands
                # then do 'set origin', 'set tmargin', 'set size' etc. for each
                # separate plot
  set nomultiplot #The last line in the command file
# location and sizes of smaller plots, viewport is [0:1,0:1]
  set size 0.5, 0.5
  set origin 0.0, 0.5
# to eliminate offsets between plots (units are character sizes)
  set tmargin 0
  set bmargin 0
# losing the labels?  include them before the last plot command 
#
# All labels apply to all subsequent graphs in multiplot mode. 
# To relabel each graph individually, shut off the labels after 'set origin' via
  set nolabel
# You can also name, and then shut off an individual label, e.g. 
  set label 2 "string" at 3,4
  set nolabel 2
# By default labels are numbered sequentially throughout the command file.

LaTeX of multiple plots

Either make a single plot with multiplot as above, or make each plot individually and combine in the latex document. The following from the Kawano site: 

\documentclass{article}
\usepackage{graphics}
\begin{document}
\begin{figure}
  \begin{center}
    \begin{tabular}{cc}
      \resizebox{60mm}{!}{\includegraphics{test1.eps}} &
      \resizebox{60mm}{!}{\includegraphics{test2.eps}} \\
      \resizebox{60mm}{!}{\includegraphics{test3.eps}} &
      \resizebox{60mm}{!}{\includegraphics{test4.eps}} \\
    \end{tabular}
    \caption{This is sample figures.}
    \label{test4}
  \end{center}
\end{figure}
\end{document}

Fits to data

  f1(x) = a1*tanh(x/b1)           # define the function to be fit
  a1 = 300; b1 = 0.005;           # initial guess for a1 and b1
  fit f1(x) 'force.dat' using 1:2 via a1, b1

  f(x) = a*x + b                  #plot the data and a linear fit
  fit f(x) 'try.dat' using 1:2 via a,b
  plot 'try.dat' using 1:2 w p pt 3, f(x)

Tic mark control

# mytics is number of small intervals marked between major tics in y
# if you want 4 minor tics between each major tic in y
  set mytics 4 
# ytics controls major tics on y-axis
# the logscale is to plot logs
# a typical log plot will have
  set logscale x
  set xrange [1:21]
  set xtics 1,10,100
  set mxtics 10
# to shut off tics:
  set noxtics
  set noytics
# For tic marks every 0.02, when x increases to left
  set xtics 3.64,-0.02,3.40
# Various specific tic marks and their labels
  set xtics ("low" 0, "medium" 50, "high" 100)
  set xtics (1,2,4,8,16,32,64,128,256,512,1024)
  set ytics ("bottom" 0, "" 10, "top" 20)
# size of tic marks 
# first number is for major tics, second for minor 
# defaults are 1 and 0.5, negative numbers put tics on outside
  set ticscale 2 1

Box / axis label controls

The default labels on the graph are often too small. To make the default size bigger define it in the terminal command, as below. For some inexplicable reason here the fontname is in quotes, then a space, then the number, as opposed to a quote, fontname, comma, number, endquote, the way it normally behaves. 

# The terminal command is the first line in the command file
  set terminal postscript eps enhanced "Helvetica" 30
# axis labels
  set xlabel "Distance (AU)" font "Helvetica,24"
# To turn off x-labels of tic marks
  set format x ""
# In a log plot, make x-axis labels 10, 100, 1000, and then 1e4, 1e5...
# The '3' controls where the format swtiches to exponential
  set format x "%.3g"
# To not draw the box when you plot
  set noborder
# to eliminate offsets between plots (units are character sizes)
# see multiple plots
  set tmargin 2
  set bmargin 2

Labels

# Example of a label on the x-axis (the 22 is point size; Bold is another font to try)
  set label "3.52" at 3.52,-1.65 center font "Helvetica,22"
# Example of a y-axis label
  set label "log (L/L_\o)" at 3.66,-0.5 center rotate font "Helvetica,24"
# to put label "y=x" at location (1,2), rotated by 43 degrees:
  set label "y=x" at 1,2 rotate by 43 font "Helvetica,20"
# same as above but going to the right of (1,2):
  set label "y=x" at 1,2 right
# to put label "y=x" at center of graph:
  set label "y=x" at graph 0.5,0.5
# Inserting special symbols, greek letters and italics, subscripts, superscripts:
# These only look right on the final .eps file if you include the
# enhanced option: set term postscript eps enhanced -- add this to the fig.gnu file
# along with set output 'fig.eps', then run gnuplot fig.gnu in another window and
# gv fig.eps in a third window
  set xlabel 'Flux, F_{/Symbol L} '       
  set ylabel 'Intensity, {/Times-Italic I}_o'   
  set xlabel "N_{e} (cm^{-3})"  
# {/*0.75 K} is a K at three-quarters of whatever fontsize is currently in effect.
# {/Symbol=20 G} is a 20-point GAMMA
# For special symbols specify \char-code (in octal)
#  e.g., {/Symbol \245} is the symbol for infinity. 
#        {/Symbol \305} is the Earth
#        {/Symbol \360} is the degree symbol
#        {\247} is the section symbol
# There does not appear to be a sign for the Sun
# These are all stored in /usr/local/gnuplot-3.7/docs/ps

For Angstroms, set encoding iso_8859_1, {\305}; then set encoding default

To get a space the size of a string type &{string} [enhanced ps only]

If you are losing labels on multiple plots, see Multiple graphs and lines (section above).

Erase screen

clear

Grid

# this does a grid
set grid

Minimum values

# set smaller values than this to zero
set zero 1e-30

Default label and key for graph

# to turn off the annoying label in the upper right corner
  set nokey
# this key has a title
  set key 0.018,150 title "F(x) = A tanh (x/B)"  
# when you plot with a 'title' this goes into the key
plot    "force.dat" using 1:2 title 'Column data' with points 3, \
        "force.dat" using 1:3 title 'Beam data'   with points 4, \
        a1 * tanh( x / b1 ) title 'Column-fit: A=309, B=0.00227', \
        a2 * tanh( x / b2 ) title 'Beam-fit: A=260, B=0.00415'

Title

# multiple lines to the title
set title "Force Deflection Data \n and curve fit"

Setting date/time as xtics

Let's say your data file, foo.dat, looks like this: 

#    Date   Value
3    04-07    100
...

You can plot the date field on the x-axis (i.e., as "xtics"), with the following set of commands: 

set xdata time
set timefmt "%m-%y"
set format x "%m/%y"
unset key
set grid
set ylabel "value"
set xlabel "date (mm/yy)"
set title "My Values Plot"
plot "foo.dat" u 2:3 w l
set term png
set output 'foo.png'
replot
  • Here is another example:
# input "foo.dat" format: 2009-04 1000
set terminal svg font "Bitstream Vera Sans,12" size 600,400
set output "foo.svg"

set xdata time
set timefmt "%Y-%m"
set xrange ["1990-01":"2009-04"]
set format x "%Y"
set key off
unset mxtics

set xtics nomirror
set ytics nomirror
set grid
set border 3

plot "foo.dat" using 1:2 \
     with line linetype rgbcolor "red" linewidth 2

Store a PostScript output file

# use the 'set output' command, the second command in the file
  gnuplot> set terminal postscript eps enhanced
  Terminal type set to 'postscript'
  Options are 'eps enhanced monochrome dashed defaultplex "Helvetica" 14'
  gnuplot> set output "file.eps"
  gnuplot> replot
  gnuplot> set output              # set output back to default
  gnuplot> set terminal x11        # ditto for terminal type

Hardcopies: landscape plots, thicker lines, location of plots, etc.

The PostScript commands used in GnuPlot are described in /usr/local/gnuplot/docs/ps/ps_file.doc. You can edit this file in several places easily. For example, '/gnulinewidth 5.000 def' sets the line thicknesses, and '50 50 translate' '0.050 0.050 scale' set the location and scale of the plot. The PostScript commands used in gnuplot are described in: 

/usr/local/gnuplot/docs/ps/ps_file.doc

You can edit this file in several places easily. For example, '/gnulinewidth 5.000 def' sets the line thicknesses, and '50 50 translate' '0.050 0.050 scale' set the location and scale of the plot. The default size seems to come out better without the 'eps', i.e., 'set terminal postscript enhanced'. Try '90 rotate' down next to the translate commands to spin the graph 90 degrees.

Calling GnuPlot from Perl

You can call gnuplot by using a short Perl-script like the following: 

#!/usr/bin/perl -w
open (GP, "|/usr/bin/gnuplot -persist") or die "no gnuplot";
# force buffer to flush after each write
use FileHandle;
GP->autoflush(1);
print GP,"set term x11;plot '/tmp/foo.dat' with lines\n";
close GP

External links

Tutorials

Retrieved from "http://wiki.christophchamp.com/index.php?title=GnuPlot&oldid=5549"