Difference between revisions of "Istio"

From Christoph's Personal Wiki
Jump to: navigation, search
(Kubernetes method)
(Prometheus and Grafana)
Line 134: Line 134:
 
==Prometheus and Grafana==
 
==Prometheus and Grafana==
  
In this section, we will be looking at using Prometheus and Grafana to gain insight into the behaviour of the traffic inside the Istio mesh. In order to gain access to this with a browser, we are going to be using Nginx to create a proxy for the services. This is the Nginx configuration that was used before (located at <code>/etc/nginx/sites-enabled/default</code>):
+
In this section, we will be looking at using [[Prometheus]] and [[Grafana]] to gain insight into the behaviour of the traffic inside the Istio mesh. In order to gain access to this with a browser, we are going to be using [[Nginx]] to create a proxy for the services. This is the Nginx configuration that was used before (located at <code>/etc/nginx/sites-enabled/default</code>):
  
 
<pre>
 
<pre>

Revision as of 22:59, 20 October 2020

Istio is an opensource tool that allows you to connect, secure, control, and observe services. It is commonly used as a service mesh in Kubernetes.

In software architecture, a service mesh is a dedicated infrastructure layer for facilitating service-to-service communications between microservices, often using a sidecar proxy.

Having such a dedicated communication layer can provide a number of benefits, such as providing observability into communications, providing secure connections, or automating retries and backoff for failed requests.

Istio architecture

Istio is made up of the following components:

Envoy (L7 proxy)
  • Dynamic service discovery
  • Load balancing
  • Health checks
  • Stagged rollouts
  • Fault injection
Control Plane API
Pilot (sends traffic to proxy)
  • Routing policies
  • Service discovery
  • Intelligent routing
  • Resiliency
Citadel
  • User authentication
  • Credential management
  • Certificate management
  • Traffic encryption
Mixer
  • Access control
  • Usage policies
  • Telemetry data
Misc
  • Galley
Istio policies
  • Uses Mixer

Install Istio

Docker method

  • Add current user to docker group:
sudo usermod -aG docker $(whoami)
  • Install docker-compose and make it executable:
COMPOSE_VERSION=1.23.2
sudo curl -L "https://github.com/docker/compose/releases/download/${COMPOSE_VERSION}/docker-compose-Linux-x86_64" \
  -o /usr/local/bin/docker-compose  
sudo chmod +x /usr/local/bin/docker-compose
  • Download Istio and unpack it:
ISTIO_VERSION=1.0.6
wget wget https://github.com/istio/istio/releases/download/${ISTIO_VERSION}/istio-${ISTIO_VERSION}-linux-amd64.tar.gz
tar -xvf istio-1.0.6-linux-amd64.tar.gz
chmod +x istio-1.0.6/bin/istioctl && mv istio-1.0.6/bin/istioctl /usr/local/bin/
  • Preconfigure kubectl for pilot:
kubectl config set-context istio --cluster=istio
kubectl config set-cluster istio --server=http://localhost:8080
kubectl config use-context istio
  • Create a DOCKER_GATEWAY environment variable:
export DOCKER_GATEWAY=172.28.0.1:  # <- don't forget the colon
  • Bring up Istio's control plane (this command may need to be repeated to ensure the pilot container starts):
docker-compose -f install/consul/istio.yaml up -d
  • Change bookinfo.yaml from using port 30080 to port 9081:
sed -i 's/9081/30080/' ./istio-1.0.6/samples/bookinfo/platform/consul/bookinfo.yaml
  • Bring up the application:
docker-compose -f ./istio-1.0.6/samples/bookinfo/platform/consul/bookinfo.yaml up -d
  • Bring up the sidecars:
docker-compose -f ./istio-1.0.6/samples/bookinfo/platform/consul/bookinfo.sidecars.yaml up -d

Kubernetes method

  • Get the Istio installation package onto the Kube Master and unpack it:
$ wget https://github.com/istio/istio/releases/download/1.0.6/istio-1.0.6-linux.tar.gz
$ tar -xvf istio-1.0.6-linux.tar.gz
  • Add istioctl to our path:
$ export PATH:<path_to_istio_bin>:$PATH
  • Set Istio to NodePort at port 30080:
$ sed -i 's/LoadBalancer/NodePort/;s/31380/30080/' ./istio-1.0.6/install/kubernetes/istio-demo.yaml
  • Bring up the Istio control plane:
$ kubectl apply -f ./istio-1.0.6/install/kubernetes/istio-demo.yaml
  • Verify that the control plane is running:
$ kubectl -n istio-system get pods

When all of the Pods are up and running (which we can verify by running that command again) we can move on.

  • Install the "bookinfo" application with manual sidecar injection:
$ kubectl apply -f $(istioctl kube-inject -f samples/bookinfo/platform/kube/bookinfo.yaml)
  • Verify that the application is running and that there are 2 containers per Pod:
$ kubectl get pods
  • Once everything is running, create an Ingress and virtual service for the application:
$ kubectl apply -f istio-1.0.6/samples/bookinfo/networking/bookinfo-gateway.yaml

Verify the page loads at the URI http://<kn1_IP ADDRESS>:30080/productpage

Verify That Routing Rules Are Working by Configuring the Application to Route to v1 Then v2 of the reviews Backend Service
  • Set the default destination rules:
$ kubectl apply -f istio-1.0.6/samples/bookinfo/networking/destination-rule-all.yaml
  • Route all traffic to version 1 of the application and verify that it is working:
$ kubectl apply -f istio-1.0.6/samples/bookinfo/networking/virtual-service-all-v1.yaml
  • Update the virtual service file to point to version 2 of the service and verify that it is working. Edit istio-1.0.6/samples/bookinfo/networking/virtual-service-all-v1.yaml (using whatever text editor you like) and change this:
    - destination:
        host: reviews
        subset: v1

to this:

    - destination:
        host: reviews
        subset: v2

Prometheus and Grafana

In this section, we will be looking at using Prometheus and Grafana to gain insight into the behaviour of the traffic inside the Istio mesh. In order to gain access to this with a browser, we are going to be using Nginx to create a proxy for the services. This is the Nginx configuration that was used before (located at /etc/nginx/sites-enabled/default):

server {
  listen 80 default_server;
  listen [::]:80 default_server;
  root /var/www/html;
  index index.html index.htm index.nginx-debian.html;
  server_name _;  
  location / {proxy_pass  http://127.0.0.1:9090;} # Prometheus
  #location / {proxy_pass  http://127.0.0.1:3000;}  # Grafana
}

There are also 2 commands that are used to forward the ports.

  • The command to forward the ports for Prometheus:
kubectl -n istio-system port-forward $(kubectl -n istio-system get pod -l app=prometheus -o jsonpath='{.items[0].metadata.name}') 9090:9090 &
  • The command the forward the port for Grafana:
kubectl -n istio-system port-forward $(kubectl -n istio-system get pod -l app=grafana -o jsonpath='{.items[0].metadata.name}') 3000:3000 &

See also

External links